Matrix Controls ground breaking V5 Masterbatch Weighing Scale System helps eliminate inaccurately weighed master batches, leading to significantly reduced material giveaway and offers a significant return on investment for most plant operations.
Squeezed by rising commodity cost and price conscious consumers – masterbatch, pvc, plastic & rubber compounders and other chemical manufacturers are examining their internal batching processes to minimize wasted batches, reducing rework and inefficiency.
By avoiding operator error with advanced batch and lot tracking systems, some of the most proactive producers are eliminating “out of specification” batches to save from 2-6% on raw material cost and are typically achieving a return on investment (ROI) within 3-6 months.
Today’s operators and more prone to making mistakes on the plant floor, especially when temporary labor is used or less well trained operators are employed. When
operators over or under scale, improperly set bulk dispensing equipment, forget to hand add an ingredient, or mix the batch for the wrong length of time, the batch can become a total loss. These sorts of problems can result in unnecessary scrap, inventory losses, time consuming reeork and inventory shortages that stop production, and can cost significant amounts of money and purchasing problems.
It is particularly difficult for management to troubleshoot problems on the plant floor when operators are asked to create paper records of production operations. These records are usually inaccurate, not just because operators must interrupt their other tasks to create them, but simply because of human nature and a reluctance to create records in real time.
Helping to reduce waste, troubleshoot more effectively, and provide full lot traceability, an advanced batch and lot-tracking system called SG V5 Masterbatch Weighing Scale System is available from SG Systems – a Dallas, TX-based leader in cost effective batch control, lot traceability and production safety solutions.
Matrix Controls V5 Masterbatch Weighing Scale System is a personal computer-based automation solution that can be interfaced to PLC based compound control systems on the production floor. It is based on the premise that the only way to prevent operators from making mistakes is to confirm and verify everything they pre-scale and add into the mixers, thereby removing their ability to deviate from the set recipe. With the product installed, operators cannot make a batch that does not meet the recipe specification, in terms of required compound proportions, as well as mixing time, speed, and mix temperature.
After a company loads their Compound Formulations into the product’s database, the formulations are sent to control stations on the production floor as needed to meet daily production schedules. It is now more common for Matrix Controls to draw data from existing ERP and Cost Accounting Systems to eliminate double handling of data.
The V5 Masterbatch Weighing Scale System software then prompts the operator step by step through the formulation on a display at the control station, which is can be connected to the mixer, necessary scales, temperature probes, and other equipment.
For the minor and micro compounds which are hand weighed or counted (non-weighed), touch screens connect to scales and balances, label printers and scanners to allow the Compound Formulation to be weighed within target zone, enforcing +/- tolerance levels to ensure accuracy.
Lot tracking for raw material traceability is also addressed by theMatrix Controls V5 Masterbatch Weighing Scale System Software. This is important for production safety in the event of a product recall (often 10-15 years or greater in the plastics industry).
The Matrix Controls Masterbatch Weighing Scale System gives manufacturers the tools to track raw material lots to specific batches, and to quickly identify other batches made with common lot numbers. Batch numbers created by the mixer can be automatically passed through to the end of line terminal (designed to connect to label printers, inkjet coders and other identification systems) to create a link between the mix and the finished product if required. This tracking number is then tied to the shipping operation to create a complete traceability solution.
The Matrix Controls V5 Masterbatch Weighing Scale System is currently used by Compound, Plastics and Chemical companies such as GE Plastics, Cooper Avon Tires, Opticolor, Kamatics, Shell Oil, Esso Lubricants, Advanced Composites & Techmer PM.
Over 2000 worldwide locations depend on Matrix Controls for the V5 Masterbatch Weighing Scale System for control and traceability.
With SG we can track the path of our product through all production, processing and distribution stages right to the end consumer.
Scott Baker, 5 Generation Bakers
SG System’s recipe control has played a big role in managing our product quality which has definitely helped our growth
Mike Prasek, Prasek’s Hillje Smokehouse
The (Production Management and Recipe Formulation) process is now more secure and dependable. Thanks a lot for the implementation!
Ricardo Hernández, Nestle
Truly a great system to gain full insight of your business and make decisions in a timely manner.
Anthony Pariti, Always Bagels
We no longer need to keystroke the handwritten batch logs into Quickbooks. We’ve seen the benefits!
Eldad Jungreis, Sunflower Kitchen
The system guarantees a reduction in the waste caused by a conventional scale system
Lenny Tyc, Northeast Foods
With the waste now eliminated, dollars are saved
Dave Harris, Original Bagel Company
The System provides total control over our production process and gives us 100% Traceability - Absolutely brilliant
Gareth Franks, Dominos Pizza
Tolerances on the scale system removed ingredient over weighing and improved our batch consistency
Michael Calise, Calise & Sons Bakery
Matrix Controls Company, Inc.
330 Elizabeth Avenue, Somerset NJ 08873
Phone: (732) 469-5551Email: email@example.com